TRB conducted a webinar on October 14, 2014, from 2:00pm to 4:00pm ET that compared the engineering properties of warm mix asphalt (WMA) and hot mix asphalt (HMA) and presented the early field performance of a series of WMA and companion HMA test sections built across the United States. This webinar was the first of a two-part series highlighting the research and findings of
NCHRP Report 779: Field Performance of Warm Mix Asphalt Technologies. The second webinar in the series,
Effects of Warm Mix Asphalt on Plant Energy & Emissions and Worker Exposures to Respirable Fumes, was held on October 27, 2014, from 2:00pm to 4:00pm ET.
A certificate for two Professional Development Hours (PDHs) was provided to attendees who registered and attended the webinar as an individual. Contact Reggie Gillum at
RGillum@nas.edu for information on obtaining the webinar recording.
Webinar Presenters
- Randy West, National Center for Asphalt Technology (NCAT)
- Carolina Rodezno, National Center for Asphalt Technology (NCAT)
- Brian Prowell, Advanced Materials Services, LLC
Moderated by: Ed Harrigan,
Transportation Research Board
Webinar Outline
- PART 1: Introduction
- PART 2: WMA mix design verification
- PART 3: Engineering properties
- PART 4: Field performance
- PART 5: Summary of findings
- PART 6: Question and answer session
The first 90 minutes of the webinar will be for presentations and the final 30 minutes will be reserved for audience questions.
Learning Objectives
At the end of this webinar, participants will be able to:
- Recall the different categories of WMA used in the United States;
- Identify laboratory performance tests that can be used to assess asphalt mixture properties;
- Summarize how properties of WMA mixtures compare to those of HMA mixtures;
- Summarize how WMA pavements perform compared to HMA pavements in the first three to five years; and
- Describe the research team’s recommended approach to WMA mix design.
To ensure that you receive notices about upcoming webinars, please subscribe to the
TRB Transportation Research E-Newsletter.
Registration Information
There is no fee for employees of
TRB Sponsors or
TRB Sustaining Affiliates who register using their work email address. In addition to employees of TRB sponsor organizations, the following are eligible to receive complimentary webinar registration:
- TRB and National Academies employees;
- Chairs of TRB standing committees, sections, or groups;
- CRP panel members who were involved with developing the report or project that is the subject of the webinar;
- Members of the media;
- Employees of tribal governments; and
- Members of Congress or their staff.
Other sites must pay $89 per site. View our
pricing page for details.
After registering you will receive a confirmation email containing information about joining the webinar.
Professional Development Hour Information
A certificate for two Professional Development Hours (PDHs) will be provided to Professional Engineers (PEs) who register and attend the webinar as an individual. For groups, only the person that registers and attends the session will receive a PDH certificate.
Individuals registered as Florida PEs are required to email Reggie Gillum,
RGillum@nas.edu, with their license number.
Please check with your licensing board to ensure that TRB webinar PDHs are approved by your board.
This webinar was developed in December 2013. TRB has met the standards and requirements of the Registered Continuing Education Program (RCEP). Credit earned on completion of this program will be reported to RCEP by TRB. Certificates of Completion will be issued to individuals who register for and attend the entire webinar session. Complaints about registered providers may be sent to RCEP, PO Box 1686, Clemson, SC, 29633. Website:
www.RCEP.net.
Registration questions? Contact Reggie Gillum at
RGillum@nas.edu.
This Summary Last Modified On: 10/28/2014